» » » |
 |
Exhaust Fan, 12 In, 115 V, 1100 CFM |
|
|
|
|
Untitled Document | Item | | Exhaust Fan | | Type | | Corrosion Resistant Shutter Mount | | Propeller Dia. (In.) | | 12 | | CFM @ 0.000-In. SP | | 1100 | | CFM @ 0.125-In. SP | | 799 | | CFM @ 0.250-In. SP | | 636 | | CFM @ 0.375-In. SP | | 451 | | Sones @ 0.000-In. SP @ 5 Ft. | | 13.4 | | Max. Ambient Temp. (F) | | 104 | | Voltage | | 115 | | Hz | | 60 | | Phase | | 1 | | Full Load Amps | | 1.9 | | Motor HP | | 1/8 | | Bearing Type | | Sealed Ball | | Motor RPM | | 1625 | | Motor Type | | Permanent Split Capacitor | | Motor Enclosure | | Totally Enclosed Air-Over | | Motor Insulation | | Class B | | Height (In.) | | 15 | | Width (In.) | | 15 | | Max. Depth (In.) | | 15 | | Sq. Opening Required (In.) | | 13 | | Frame Material | | Fiberglass | | Guard Material | | Steel | | Wire Guard Finish | | Epoxy Coated | | Propeller Material | | Fiberglass Reinforced Polypropylene | | Number of Blades | | 4 | | Speed Control | | No | | Agency Compliance | | UL Listed for US and Canada |
Max. inlet/ambient temp.:104 DegreeF
Fiberglass-reinforced polypropylene propellers
OSHA-compliant epoxy-coated wire guards
Type Corrosion Resistant Shutter Mount
Propeller Dia. (In.) 12
CFM @ 0.375-In. SP 451
Voltage 115
Full Load Amps 1.9
Bearing Type Sealed Ball
Frame Material Fiberglass
Wire Guard Finish Epoxy Coated
Propeller Material Fiberglass Reinforced Polypropylene
Agency Compliance UL Listed for US and Canada
|
|
| Our Customer Average Reviews is based on top 6 Online Stores, few of them are amazon.com, target.com, walmart.com |
|
|
|
|
|
|
|
|
|
|
